How often should I oil my HighPro tools?
Can I use any lubricant to oil HighPRO tools?
How often should I drain my air compressor?
What type of filter should I use on my air line?
What pressure (psi) do the different tools use?
When should I use the AS-4090 spacer?
What size flooring are the tools set up for?
How long is the manufactuer's warrenty?

How often should I oil my HighPro tools?
You should oil your tools approx. 4 drops every 4 hours.

Can I use any lubricant to oil HighPRO tools?
Use only pneumatic tool oil. DO NOT SUBSTITUE WD-40 OR OTHER TYPES OF OIL BECAUSE THEY CAN RUIN THE O-RINGS.

How often should I drain my air compressor?
For maximum safety, drain your compressor every day before use.

What type of filter should I use on my air line?
Use a water filter on your air line and place it close to the tool. The filter will not help if the filter is too close to the compressor.

What pressure (psi) do the different tools use?
Tool Pressures:
            FS-50 / LFN-50:  Air pressure should be 90 to 110 PSI
            AS-4090:  55 to 100 PSI
            SDA-50:  90 to 110 PSI
            HP-50 Top Nailer:  70 to 90 PSI
            AS-9040 Underlayment:  80 to 100 PSI

When should I use the AS-4090 spacer?
The spacer should be used only on the 5/16 and 3/8 product. The spacer prevents tongue breakage.

What size flooring are the tools set up for?
FS-50 and LFN-50 when purchased are set up for 3/4" flooring.
**For 5/8" Flooring, remove black adapter pad and install white adaptor pad.
**For 1/2" Solid Flooring, remove black adaptor pad and bumper, and install white adaptor pad and 1/2" bumper which are supplied with the tool.

How long is the manufactuer's warrenty?
Standard maufacturer's warrenty is 90 days parts and labor.